Old wiring doesn't announce when it's wearing out. It just hides behind your walls while the outlets run hotter and the breakers trip more often. At Quality Electric TN, we handle wiring and rewiring in Williston, TN, and nearby areas, replacing tired, unsafe wiring and running fresh circuits for remodels so your home stays safe for decades to come.
Quality Electric TN is a licensed electrician headquartered in Williston, TN, providing wiring and rewiring services for homes and businesses. Our company specializes in new electrical wiring, complete and partial rewiring, rewiring for older homes, aluminum and knob-and-tube wiring replacement, and wiring for remodels and renovations, with every installation meeting National Electrical Code (NEC) standards.
A lot of solid brick ranches around here went up in the late '60s and early '70s. If you own one, maybe a few outlets feel warm lately, the bedroom lights flicker, or you've caught a faint plastic smell near a switch. Your home inspector or insurance agent may have even flagged "aluminum wiring" on a report.
Builders used aluminum wire for outlets and lights for a short stretch back then, mostly because copper prices spiked. The trouble is that aluminum expands and contracts more than copper as it heats and cools, and it oxidizes where it meets outlets and switches. Over time, those connections loosen, heat up, and can turn into a real hazard.
Before anything else, a licensed wiring electrician from our team checks the cable markings and opens a few boxes to see how the connections are holding up. Then we map out each circuit, run new copper wire through the walls and attic with as little drywall damage as possible, and replace worn outlets and switches along the way. Permits and the final inspection are on us, too.
When we wrap up, every circuit runs on copper, the connections stay tight, and those warm outlets become a memory. Your home gets safer, and it's easier to insure and sell down the road.
From a single circuit to every wire in the house, our wiring work covers it all.
Every wire we run meets NEC standards, from wire gauge to the boxes and breakers it connects to. As a local electrical contractor, we also handle permits and inspections to ensure nothing slips through the cracks.
Aluminum wire ranks among the most common wiring concerns we find in local homes. We replace it with copper from the panel to the last outlet, so that the worry is gone for good.
Knob-and-tube wiring dates back to the early 1900s, lacks a ground wire, and often has insulation that has become brittle with age. Plenty of insurance companies hesitate to cover homes that still rely on it. Our team removes the old system and installs modern, grounded wiring throughout.
Adding a room, a garage, or a workshop means running new circuits from your panel. We plan each run around how you'll use the space, so you won't end up with extension cords snaking across the floor.
Sometimes only part of a house needs attention, such as a kitchen with outdated circuits or a bedroom wing with damaged wiring. Not every home needs one of our whole-home rewires, and a targeted partial rewire fixes the trouble spots without opening up every wall.
Older homes around here have plenty of charm, but their wiring rarely keeps up with today's appliances and electronics. We update aging circuits, working around plaster walls, original trim, and other details you want to keep.
When the wiring throughout a house is worn, unsafe, or undersized, starting fresh makes the most sense. Our whole-home rewiring service replaces every circuit, and we move room by room to keep your home livable while the job's underway.
Opening walls for a remodel is the perfect time to bring the wiring up to date. Our schedule bends around your contractor's timeline or your own, and we add circuits for new lighting, appliances, and outlets before the drywall goes up.
When electrical problems pop up, we help get to the bottom of them with residential and commercial electrical repairs. Our services include troubleshooting power loss, short circuits, overheating outlets, faulty switches, and other electrical issues that could put your property at risk.
If your electrical panel struggles to keep up with your home's needs, we provide electrical panel upgrades, outdated panel replacements, meter base replacements, and service entrance cable replacements. Our service upgrades can accommodate up to 600 amps, depending on the property's requirements, and we install systems in compliance with applicable electrical codes.
From a breaker that keeps tripping to an outlet that needs replacing, we handle electrical devices that help keep your home's electrical system working properly. Our services include breaker installation and replacement, dedicated appliance circuits, ground fault circuit interrupter and USB outlets, switch repairs, and troubleshooting overloaded circuits.
Want to brighten a room or fix a light that won't cooperate? We handle lighting installation and repairs, including fixture replacements, chandeliers, recessed lighting, motion-sensor lights, and indoor and outdoor lighting for homes and commercial properties.
Charging your electric vehicle (EV) at home can be much more convenient with a properly installed Level 2 charger, and we provide EV charger installation tailored to your property's electrical needs. Our work includes dedicated circuits, charger wiring, panel capacity evaluations, and installation planning to help ensure your charging setup meets applicable electrical codes.
Unexpected power outages can disrupt your routine, so we provide generator installation to help keep essential systems running when the electricity goes out. Our services include whole-home and standby generators, electrical connections, automatic transfer switches, generator circuits, and system inspections to help maintain safe operation.
Building a new home, shop, or outbuilding? We provide new construction electrical services, including electrical wiring, service installations, and trenching, to deliver power where it needs to go.
Rewiring a home takes trust, and these are a few reasons our neighbors place this job in our hands.
A full rewire can be a sizable investment, and Wisetack financing through our team turns that cost into steady monthly payments.
Expect a complimentary consultation from us, along with an honest walk-through of what's behind your walls.
Our crew calls Fayette County home, so the houses we rewire belong to the same community we live in.
Three years of workmanship coverage and one year on parts and materials keep your new wiring protected long after the walls close back up.
Thanks to our 10% military and first responder discount, those who serve save on every project with us.
We rely on high-quality components from trusted names, including Generac and Tesla, to build systems that last.
In most cases, yes. Electricians usually work room by room and restore power to the finished areas at the end of each day, so you'll deal with some noise, dust, and short outages, but you can typically stay put. Families with small kids, pets, or someone working from home sometimes plan a few nights elsewhere during the busiest stretch.
Look at the cable jacket in your attic or basement: aluminum wiring usually carries "AL" or "ALUMINUM" markings, and the bare wire looks silver rather than copper-colored. Knob-and-tube shows up as single wires running through white ceramic knobs and tubes, often in the attics of homes built before the 1940s. Opening the panel or outlets can be dangerous, so let an electrician confirm what you've got.
Modern copper wiring can last 50 years or more, but the insulation, connections, and devices around it wear out sooner. Attic temperatures during a West Tennessee summer can climb well past 120 degrees Fahrenheit, which speeds up that wear. Homes over 40 years old, or any home with warm outlets or frequent tripping, deserve a professional inspection.
A partial rewire of a few rooms often takes a day or two, while a whole house usually takes several days to two weeks. The size of the home, attic and crawl space access, and wall type all play a role, since plaster takes longer to work around than drywall. Inspections and wall patching can add a few more days.
For many older homes, it is. Rewiring replaces outdated systems like aluminum or knob-and-tube wiring, adds grounded outlets, and gives you enough capacity for modern appliances and electronics. Buyers and insurance companies also tend to view a home with updated wiring more favorably.
FAQs reviewed by Zachary Lindsey, owner of Quality Electric TN, a licensed and local electrician in Tennessee.
Call us or book online, and we'll take a look at your wiring with a free estimate. Your family deserves wiring you never have to worry about.
Business Name: Quality Electric TN
Address: Williston, TN, 38076
Phone: 901-651-8154
Business Hours:
Mon - Sun: 24/7
Financing available through Wisetack
one-year parts and material warranty
three-year workmanship warranty
Military and first responders discount - 10%